Bitumen-water interfacial tension modeling by using subtractive clustering method

Calculation of interfacial tension during bitumen production is a crucial issue in heavy crude oil history. Upon variation in pressure, temperature and phases composition, interfacial tension between bitumen and water change. In this work a sophisticated method called subtractive clustering was utilized to predict dynamic interfacial tension between bitumen and water. The subtractive clustering method is composed of optimized fuzzy logic algorithm. A data bank which is collected from open-source literature, is used to create a reliable model. Then the prediction accuracy of the measured dynamic interfacial tension using subtractive clustering have been examined. Results state that the comparison of measured interfacial tension and predicted interfacial tension indicate acceptable accuracy of proposed model. Also more than 90 percent of data points have less than 3 percent absolute error.     

利用调度优化模型研究原油调合方案的可行性

针对某沿海炼油企业拟投用原油调合系统以稳定混炼原油的性质,设计方案要求将部分码头罐的操作模式由混储改为单储的情况,采用约束规划与数学规划复合建模,实现了码头至厂区大容积长输线模拟,建立了该企业的原油调度优化模型并研究了设计方案的可行性。针对240h调度周期、10种可加工原油、3艘到港油轮的复杂工况进行了优化计算。结果表明:该设计方案具备可行性,且油轮仍可实现到港即卸油,蒸馏装置混炼油种也可长时间保持稳定;模型的优化计算时间较短(小于15min),且对长输线收付及存油情况模拟准确,复合建模方法满足工业应用要求。     

基于计算机控制的新型鸡精组分建模研究

以鲜鸡肉粉(富钙型)、味精、食盐、白砂糖、淀粉为主要原料,根据谷氨酸钠、呈味核苷酸二钠、总氮、水分含量的要求,利用计算机数学建模法计算出鸡精中各原料的组分。选出8组较优的方案制成鸡精,上述4种物质的含量与模型非常接近,其中第1组方案的营养价值和感官评价均最好,配方为鲜鸡肉粉14%、味精22%、食盐36%、白砂糖7%、淀粉5%。实验结果表明基于计算机控制的新型鸡精组分建模准确,具有指导意义。     

Adsorption isotherm and kinetic modeling of a novel procedure for physical modification of silica gel using aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) for preconcentration of Ni(II) ion

ABSTRACT

Aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) (EDDBP) have been used in a novel green procedure for the physical modification of silica gel (SG) for solid-phase extraction and preconcentration of Ni(II) ion. Optimization experiments were carried out at 301 ± 1 K by batch technique. The EDDBP-modified SG was characterized using X-ray Diffraction Spectroscopy (XRD) and Brunaeur-Emmett-Teller (BET) determinations. The adsorption isotherm and kinetic models indicated a physisorption process. The modified SG showed moderate to high adsorption capacity values for Ni(II) ion (~98% removal efficiency) at pH 8. A sorption mechanism for Ni(II) chelation with EDDBP-modified-SG was proposed. These results suggest the procedure has advantages.     

偶联剂对PLA/PBAT/WF复合材料3D打印性能的影响

以聚乳酸（PLA）和聚己二酸/对苯二甲酸丁二酯（PBAT）为基体，杨木粉（WF）为填充增强材料，使用混炼机熔融共混制备PLA/PBAT/WF复合材料，采用熔融沉积成型（FDM）技术制备标准实验试样，通过扫描电子显微镜、红外光谱分析、旋转流变测试以及力学试验等方法，研究不同含量的硅烷偶联剂KH550对PLA/PBAT共混物以及PLA/PBAT/WF的相容性、流变性及力学性能的影响。结果表明，在偶联剂用量为3 %（质量分数，下同）时，拉伸强度提高了136 %；偶联剂KH550与 PLA和PBAT共价键偶联生成接枝聚合物，二者相容性得到提高；同时偶联剂与WF表面羟基发生缩聚反应有效的改善了其与PLA/PBAT的基体相容性，PLA/PBAT/WF复合材料的FDM的制件力学性能得到较大提升；复合材料的黏度随偶联剂含量的增加呈下降的趋势，含量为3 %时线材的综合打印性能及制品质量最佳。     

基于旋翼负压混合吸附的爬壁清洗机器人系统动力学性能研究

针对爬壁清洗机器人越障时,负压装置的吸附力下降导致吸附不稳定的问题,设计了一种旋翼负压混合吸附工作的多边形履带清洗机器人,并对爬行稳定性及越障性能进行了动力学分析。首先根据机器人爬壁的运动原理,建立机器人沿玻璃幕墙上的动力学模型,计算出电机理论驱动力矩;其次分析机器人在跨越障碍过程中的运动模型,结合与壁面接触的实际受力状态,对越障过程中关键阶段的本体倾翻、滑移两种失效形式进行运动学和动力学分析;然后根据玻璃幕墙实际的障碍高度,确定多边形履带的参数和理论驱动力矩的大小,并研制了实验样机进行爬行和越障试验,结果表明所设计的机器人具有良好的越障性能。     

Process-induced variability modeling of subthreshold leakage power considering device stacking

The dominance of leakage currents in circuit design has been impelled by steady downscaling of MOSFET into nanometer regime, and has become a significant component of total IC power dissipation. The issue is further aggravated with the inability to gauge the tolerance of process parameters around their nominal value. Consequently, the drive to improve the static power prediction has enticed accurate and reliable modeling of leakage current, specifically for ultralow power applications. In contrast to gate- and band-to-band-tunneling leakages, subthreshold leakage exhibits high susceptibility to process variations and hence has been considered for variability modeling. Fluctuations in the device electrical and geometry parameters result in a wider distribution of subthreshold leakage current. Hence, taking into account stacking effect, an analytical variability model to estimate subthreshold leakage power in subthreshold circuits, in the presence of threshold voltage variations is proposed. Further, the impact of threshold voltage variability on subthreshold leakage power is modeled in conjunction with simultaneous variations in gate length and width. The leakage power variability is characterized by model-generated distributions obtained using Monte Carlo analysis and validated against SPICE simulations. The proposed model is about 700 computationally faster than SPICE simulations with mean error being less than 0.19%.     

Novel hybrid serpentine-interdigitated flow field with multi-inlets and outlets of gas flow channels for PEFC applications

In our previous study, a novel flow field design for a polymer electrolyte fuel cell (PEFC) called “Hybrid Serpentine-Interdigitated (HSI)” had been proposed. Although it was very promising in terms of performance and pressure drop, it still had a major drawback of the low oxygen concentration area. To improve its design and performance, three HSI configurations with different numbers of gas inlet and outlet, namely one inlet and one outlet HSI (1-IO HSI), one inlet and two outlets HSI (1I-2O HSI) and two inlets and two outlets HSI (2-IO HSI) were numerically investigated and compared with the conventional single channel serpentine (1S). The investigation on the cell performance and other transport behaviors has been carried out using CFD techniques via ANSYS FLUENT software. At a practical operating potential of about 0.6 V of 50 cm² PEFCs, the 2-IO HSI offered the best distributions of oxygen, current density and water due to the shorter channel length. More importantly, the 2-IO HSI could contribute to a reduction in cathode pressure drop by 90%, as compared with the 1S, resulting in the enhancement in the net power output by 6%, approximately.     

Predicting the damage development in epoxy resins using an anisotropic damage model

For fiber-reinforced plastics, the strain-rate dependent response is governed by the matrix behavior. In this work, the Goldberg model is considered for the epoxy matrix constitutive material model. Moreover, the strain-rate dependency is achieved by direct influence on the elastic modulus, the inelastic strain, and the material strain to failure. In addition, an anisotropic damage response is implemented and extended through a strain-rate dependent definition. Since the constitutive model relies on nonphysical parameters, a parameter study is further performed. Additional numerical investigations using a micro-mechanical model are performed. Tension and shear loading conditions are evaluated and the influence of different strain rates is explored. Furthermore, the implemented anisotropic damage model is compared and discussed against an isotropic damage model.     

随车起重机伸缩臂截面多目标优化

为了提高某火箭炮弹药装填车随车起重机伸缩臂的结构刚度,减轻结构质量,建立了随车起重机伸缩臂参数化模型,并对伸缩臂在水平受载状态下进行仿真分析。以伸缩臂截面尺寸参数为设计变量,借助最优拉丁超立方试验设计建立样本空间,构造响应面多项式函数近似模型。在此基础上,利用NSGA-Ⅱ型遗传算法对伸缩臂自身重量、挠度进行多目标优化。优化结果表明:伸缩臂质量减轻了24.5%,减重效果明显。文中所采用的将参数化建模、有限元分析和数值寻优相结合的优化方法,可为起重机伸缩臂截面优化提供一定的参考。